ODROID-H3 / H3+

$161.95

Variant

H3+

Quantity

Disclaimer for Price Display Issues:

We strive to ensure that all prices displayed on our website are accurate. However, in rare cases, you may encounter an incorrect price for a product variant due to technical issues. If you notice a discrepancy in the price displayed when selecting a variant, please try the following steps:

Clear your browser cache and reload the page.
Use a different browser.
Add the variant to the cart.

The correct price will always be displayed in your cart before you complete your purchase. We apologize for any inconvenience this may cause and appreciate your understanding.

ODROID-H3 and H3+ have the same form factor and similar power efficiency as their predecessor, the ODROID-H2+. However, the H3 and H3+ are more powerful, offering higher performance. You’ll need to supply your own memory and storage (check the recommended accessories on this page) — but since the ODROID-H3 family uses the same components commonly found in modern laptops, you should have no trouble finding compatible hardware to fill out your SBC.

ONLY NVMe M.2 SSD ARE COMPATIBLE: PCIe NVMe M.2 SSD

Both models of ODROID-H3 feature two SO-DIMM slots for memory, two SATA ports and one M.2 NVMe slot for storage, two 2.5 GbE ports, two USB 3.0 ports, two USB 2.0 ports and more!

ODROID-H3: Intel quad-core Jasper Lake N5105 processor
ODROID-H3: Intel quad-core Jasper Lake N6005 processor

Additional items required to operate - see "REQUIRED ITEMS" section below.

KEY FEATURES

SoC:

H3: Intel Jasper Lake N5105 quad-core processor, base clock of 2.0GHz and boost up to 2.9 GHz
H3+: Intel Jasper Lake N6005 quad-core processor, base clock of 2.0GHz and boost up to 3.3 GHz

GPU:

H3: Intel UHD Graphics 24 EUs Turbo 800MHz
H3+: Intel UHD Graphics 32 EUs Turbo 900MHz

System Memory – Dual-channel Memory DDR4 PC4-23400 (2933MT/s) supporting up to 64GB RAM in total
Storage – M.2 PCIe 3.0 x4 slot for one NVMe storage, 2x SATA 3.0 ports, eMMC flash support
Video Output
- HDMI 2.0 up to 4K (4096×2160) @ 60 Hz
- DisplayPort 1.2 up to 4K (4096×2160) @ 60 Hz
Audio – HDMI, audio jacks for HP, MIC. and S/PDIF
Connectivity – Dual 2.5 Gigabit Ethernet (RJ45)
Expansion – 24-pin header with I2C, UART (3.3V), USB2.0 and HDMI CEC signals
SSE4.2 accelerator (SMM, FPU, NX, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES)
A configurable Unlimited Performance mode allowing the CPU to run in sustained turbo boost mode
Misc – RTC battery (Included)
Power Supply – 14V to 20V DC power input
Dimensions – 110x110x43mm
Weight – About 320 grams with heatsink, two DRAM modules, and M.2 NVMe SSD.

REQUIRED ITEMS (NOT INCLUDED)

No power supply included - 15VDC/4A power supply required
No RAM pre-installed - DDR4 SODIMM

DDR3/DDR5 is not supported

No eMMC Module or SSD included

M.2 SATA SSD is not supported (only NVMe SSD)

No case included
No HDMI cable included - needed to connect to a display device. Recommend HDMI2.0 cable to support 4K output

SPECIFICATIONS

Processor:

Intel Celeron N5105(H3+: N6005) Processor (10nm, Quad-Core, TDP 10W)
H3(N5105) : up to 2.9GhzH3+(N6005) : up to 3.3Ghz
4MB L2 Cache
Intel UHD Graphics (24/32 EU up to 900MHz)

Memory:

2 x DDR4 1.2V SO-DIMM slots, Dual Channel, up to 2933 MT/s (DDR4-PC23400)
Max memory capacity 64GB
DDR3/DDR5 are not supported

Storage:

1 x eMMC connector (bootable and selectable on BIOS)
2 x SATA3 6Gbps
1 x M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards)
M.2 SATA SSD is not supported

Networking:

2 x GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps)
Realtek RTL8125B
Supports Wake-On-Lan
LED indicators (Green: Link, Amber: Traffic)

Video:

1 x DisplayPort 1.2 (up to 4K@60Hz)
1 x HDMI 2.0 (up to 4K@60Hz)
Dual simultaneous display support

Audio:

1 x Audio out (3.5mm jack)
1 x Audio in (3.5mm jack)
1 x SPDIF out (ALC1200, HDA codec)
* HDMI & DP have audio output too.

External I/O:

2 x USB 3.0 Host ports
2 x USB 2.0 Host ports
1 x Peripheral Expansion Header (24-pin, 2.54mm pitch)
1 x DC 5V, 1 x DC 3.3V, 5 x GND
1 x UART (TXD/RXD/RTS/CTS)
2 x I2C (SCL/SDA)
1 x External Power Button
HDMI CEC, 5VA+
Three USB 2.0 ports
All 3.3V I/O signal level

Other Features:

Passive Heatsink
BIOS Backup Battery
Maintains system time and BIOS settings
Power Button
Reset Button
System LEDS Indicators:
Red (PWR) – Solid light when DC power is supplied
Blue (left, SLEEP) – turns off only when the system enters into suspend mode
Blue (right, PMIC) – turns on only when the major power rails are working
Amber (SATA) – Flashes when SATA data transfers
Green (NVMe) – Flashes when NVMe data transfers
Active Cooling Fan Connector (12V 4-pin, PWM input + TACHO output)
Active Cooling Fan is optional
Connector (4-pin, 2.54mm pitch)

Power:

DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm
DC 14V ~ 20V (up to 60W)
DC 15V/4A power adapter is recommended if you don’t use two 3.5“ HDDs
DC 19V/7A power adapter is recommended if you two 3.5” HDDs together
Power consumption:
IDLE : ≃1..9W
CPU Stress : ≃15W
CPU+GPU Stress : ≃18W
Power-off : ≃0.25W
Suspend : ≃0.6W

Form Factor:

110mm x 110mm x 47mm Approx.

A. CPU (Intel Celeron N5105)
B. 2 x DDR4 SO-DIMM slots (Dual channel memory support)
C. 1 x M.2 PCI Express Module Socket (NGFF-2280)
D. 1 x eMMC (Embedded Multimedia-Card) Socket
E. 2 x SATA Power Connectors (2.5mm pitch, JST-XH compatible connector)
F. 2 x SATA3 6.0 Gb/s Data Connectors
G. 1 x DC Power Jack
H. 2 x USB 3.0
I. 2 x USB 2.0
J. 1 x HDMI 2.0
K. 1 x DisplayPort 1.2
L. 2 x RJ45 Ethernet Ports (10/100/1000/2500)
M. 5 x System LED Indicators
N. 1 x Peripheral Expansion Header (24-pin)
O. 1 x Power Switch
P. 1 x Reset Switch
Q. 1 x Backup Battery Connector (2-pin)
R. 1 x Active Cooling Fan Connector (4-pin)
S. 1 x Audio out, 1 x Audio in, 1 x SPDIF out

ODROID-H3 / H3+

SPECIFICATIONS

LINKS

VIDEOS

Filters

Architecture

Brand

RAM

Recommended Power Supply

SoC

Our Favorites!

ODROID-H3 / H3+

You recently viewed

Navigate

Community

Support

Follow us

VIP